A SPIS is a clean and sustainable irrigation technology that utilizes solar energy to pump and distribute water for agricultural use. As water scarcity and unreliable energy access continue to challenge agricultural productivity, SPIS offers a sustainable alternative to the most common irrigation systems by reducing dependence on fossil fuel sources, preventing from the consequences of their volatile prices. By replacing diesel- or gasoline-powered pumps, it lowers greenhouse gas emissions, reduces air pollution, and generates significant cost savings for farmers.

Beyond lowering operating expenses, SPIS also supports more consistent and productive farming: it is one of the best-studied solutions for improving smallholder farmers’ livelihoods, as access to modern irrigation can substantially increase yields, with case studies showing improvements of up to two- to three-fold (Efficiency for Access, 2019). This reliability enables year-round cultivation, leading to higher crop output, greater diversification, and improved farmer incomes (Schneider S., Raabe M. et al., n.d.).

SPIS is suitable for a wide range of irrigation scales, from small household gardens to large agricultural fields. It is particularly suitable for adoption in rural areas with limited access to electricity and abundant solar radiation, offering an affordable solution to increase agricultural productivity.

Solar cooling systems are generally divided into two types: passive and active.

Passive solar cooling does not use any mechanical devices or electricity. Instead, it relies on smart building design and natural processes to keep spaces cool. For example, buildings can be designed to have proper shading, reflective roofing materials, and good air flow through windows or vents. These methods help to reduce indoor heat without using any machines. They are simple, cost-effective, and very useful, especially in areas where access to electricity is limited.

Active solar cooling, on the other hand, uses technology and equipment to convert solar energy into usable power that runs cooling systems as described below. The three main types of active solar cooling include:

1. Solar absorption cooling, which uses solar-heated fluids to run absorption chillers; the chiller cools air by using a mix of fluids that work together – often lithium bromide and water. It’s good for places with strong sunlight and large cooling needs.
2. Solar ejector cooling, which relies on solar thermal energy to power ejectors that produce cooling through pressure differences.  This system uses solar heat to drive a jet ejector – a simple device that compresses and expands a gas (called a refrigerant) to make it cold. Because of its simplicity, solar ejector cooling is best for small-scale uses like rural homes or remote clinics.
3. Solar desiccant cooling, which removes humidity from the air using solar-regenerated drying materials (desiccants, like silica gel). This method is ideal for hot and humid climates.

Note: The three techniques outlined above represent the different systems of active solar cooling. However, for those systems to work, they must be powered by solar energy. Section 1.1 explains the fundamental ways these systems are powered using two main approaches: solar electric and solar thermal to supply the required energy to run these cooling systems.

Clean cooking refers to the practice of using cooking technologies and fuels that reduce pollution and harmful emissions of greenhouse gases and improve efficiency. It is about shifting away from traditional methods like open fires and inefficient stoves that burn wood, cow dung, or other solid polluting fuels towards modern and cleaner alternatives. 

In fact, more 950 million people in Sub-Saharan Africa are still dependent on wood or charcoal (United Nations Climate Change, 2021) with severe consequences especially for women, children, and other vulnerable groups who spend hours collecting firewood and facing significant health risks from indoor air pollution (Health Effects Institute, 2024).

In this context, testing and rolling out clean cooking alternatives is critical. Not only for achieving the Sustainable Development Goals, but also for improving health by reducing premature deaths linked to smoke exposure. By minimizing harmful smoke, modern and clean cooking technologies help prevent respiratory diseases and enhance the quality of life within households. Importantly. Women and children can reclaim several hours each day that would otherwise be spent gathering fuel and starting fires, opening up greater opportunities for education, personal development and economic participation.

The benefits extend beyond health. Shifting to modern cooking solutions reduces reliance on inefficient use of traditional biomass and contributes to protecting forests and curbs greenhouse gas emissions, reinforcing climate action efforts and preserving local ecosystems. At the same time, clean cooking initiatives open new economic opportunities, from the production and distribution of stoves to the creation of supportive services, stimulating local employment and strengthening livelihoods (IEA, 2023a; IEA, 2023b).

Cooking requires heat, commonly produced by combustion. New technologies are now exploring alternative ways to generate the increase in temperature needed for food to be cooked, thanks to electricity and solar irradiation. At the same time, different fuels and cookstoves are tested to minimise the environmental and health risks, in fact, not all combustion generates the same amount of carbon dioxide (CO2), particulate matter (PM) and other types of pollutants, and a great number of harmful emissions can be avoided by using more efficient equipment and fuels.

Examples of clean cooking solutions include:

• Modern stoves designed to burn traditional fuels such as charcoal, wood and dung, more efficiently and less smoke and pollutants. 
• Modern fuels like liquid petroleum gas (LPG), natural gas, biogas, and electricity.
• Solar cookers that use solar energy to heat food, reducing the need for traditional and modern fuels. 

To compare the many stoves that are on the market, the International Organization for Standardisation (ISO) published in 2018 the first international standard for laboratory testing of cookstoves. Stoves can be categorised in “tiers” on a scale that goes from 0 (baseline) to 5 (high level of performance across all indicators).  Indicators are rated individually, and it is possible the same cookstove has different tiers depending on the category. A tier is essentially a performance level:

• Tier 0–2: Traditional open fires or basic biomass stoves that are highly polluting, inefficient and expose users to harmful pollutants.
• Tier 3: Transitional options such as improved biomass cookstoves (ICS), which burn solid fuels more efficiently and produce less smoke but still rely on biomass.
• Tier 4–5: Clean cooking solutions such as LPG, biogas, ethanol, electricity, and advanced stoves that meet international standards for efficiency, safety, and very low emissions.

The World Bank looked at these technologies from a more comprehensive perspective and developed a Multi-Tier Framework (MTF) that includes in the assessment factors such as fuel availability and affordability.

According to the International Energy Agency (IEA), while technologies under Tier 4 and above are classified as clean cooking solutions, Tier 3 ICS remain an important transitional technology. They can deliver significant health benefits, decrease household fuel use, and reduce reliance on traditional biomass, being particularly important in rural contexts where clean fuels and infrastructure remain limited or financially inaccessible in the near future (IEA, 2023a).

The two innovations that were initiated, demonstrated, and replicated through the SESA project in Ghana and Malawi Living Labs are:

1. The Econexus Ventures Limited (Econexus) Bio-Ethanol Cooker (Ghana)
2. The Make it Green (MiG) BioCooker (Malawi)

Both incorporate elements from the first and the second type of clean cooking solutions listed above, seeking to improve efficiency with new types of fuels such as gel and briquettes, both using byproducts as a source.

In many communities, accessing reliable internet can be a challenge. Lack of infrastructure, high costs, and limited knowledge can create a significant digital divide. But what if there was a way to provide essential online resources that are both accessible and affordable?

The answer lies in Community Information Spots, or InfoSpots, and a new manual designed to help communities, operators, and users get the most out of them.

Introducing the PRACTICAL OPERATION AND MAINTENANCE MANUAL ON COMMUNITY INFORMATION SPOTS (INFOSPOTS). Developed by the SESA project (Smart Energy Solutions for Africa) – Authors: Wisam Mansour, Prof. Josef Noll, Jonathan Muringani, Catherine Kimambo, Basic Internet Foundation and funded by the European Union, this guide is your key to unlocking the power of local connectivity

What Exactly Is an InfoSpot?

An InfoSpot is a localized internet access point that provides essential information where traditional internet is weak or too expensive. It’s a clever combination of technology: a powerful antenna that captures weak mobile signals, a Local Network Control Centre that manages Wi-Fi, and a local server that hosts free, cached content. This smart setup ensures communities can access vital information without incurring high data costs.

Why This Manual Is a Must-Have

This manual is more than just a guide—it’s a tool for empowerment. It provides the knowledge and skills necessary to ensure these critical systems are operated sustainably and effectively.

• Empower Your Community: Learn how to install, test, and manage your local InfoSpot to provide reliable internet access to schools, small businesses, and community members.

• Save Money & Resources: The manual teaches you best practices for operation and maintenance, helping you reduce unnecessary expenses on repairs and energy waste.

• Promote Local Development: By providing consistent and reliable internet access, you can help your community bridge the digital divide, access new opportunities, and promote local growth.

• Gain Practical Skills: Get detailed guidance on troubleshooting common issues and a security-focused approach to system management.

The manual also explains the “Internet Lite for All” concept, which uses a clever freemium model to balance inclusivity with sustainability. It provides free access to essential text-based information while offering premium access for bandwidth-intensive activities. This ensures everyone can access critical resources, regardless of their ability to pay.

This guide serves as an essential resource for system operators, community leaders, and everyday users. By empowering you with the knowledge to maintain your InfoSpot, we can ensure communities everywhere have the tools they need to thrive in a connected world.

Are you a technician, a small or medium-sized enterprise (SME) proprietor, or an ordinary consumer looking to master the operation and maintenance of your solar photovoltaic (PV) systems? Look no further!

Introducing the Practical operation and and Maintenance manual for Solar PV: A Comprehensive Guide to Efficient Solar Energy Management and Maintenance, a new publication from the SESA project (Smart Energy Solution for Africa) – Authors: Engr. Dr Albert Kotawoke Awopone, Prof Isaac Boateng, Akenten Appiah-Menka University of Skills Training and Entrepreneurial Development (AAMUSTED); Edem Foli, Nelson Mandela University (NMU); Silvia Assalini (ICLEI Europe).

This capacity-building manual is your go-to resource for optimising the efficiency, safety, and longevity of your solar PV systems.

What You’ll Gain from This Manual:

• Valuable Insights for SMEs: Learn the necessary knowledge and skills to optimise energy efficiency, regulate costs, and ensure the longevity of your solar PV systems.
• Comprehensive Maintenance Guidance: Get extensive, step-by-step instructions on routine maintenance, troubleshooting common issues, and knowing when to call for expert help.
• Empowerment for All Users: Whether you’re a homeowner or a small business proprietor, this manual will deepen your understanding of your solar PV system’s fundamental operation, performance monitoring, and environmental benefits.
• Safety First: The manual highlights essential safety protocols to protect individuals interacting with the systems and to prevent accidents.

Key Advantages:

• Cost Savings: Educate yourself on optimal strategies to operate and maintain your system, which helps eliminate unnecessary expenditures on repairs and wasted energy.
• Sustainable Practices: By promoting a deeper understanding of solar PV systems, the manual supports the overarching goal of reducing carbon footprints and advancing green energy solutions.
• Adherence to Standards: The guide assists users in adhering to both domestic and international benchmarks, ensuring your system is up to par.
• A Practical Resource: This is an indispensable guide for anyone involved in solar PV systems, offering practical, efficient, and security-focused advice.

Empower yourself and embrace sustainable energy with this essential new guide.